From rc1.vub.ac.be!ub4b!EU.net!uknet!pipex!howland.reston.ans.net!news.intercon.com!digex.net!digex.net!not-for-mail Thu Mar 10 10:07:04 1994 Path: rc1.vub.ac.be!ub4b!EU.net!uknet!pipex!howland.reston.ans.net!news.intercon.com!digex.net!digex.net!not-for-mail From: kmccorm@access1.digex.net (Kevin McCormick) Newsgroups: comp.sys.ibm.pc.demos Subject: How in the world did they do MARS.EXE? Date: 28 Feb 1994 20:16:05 -0500 Organization: Express Access Online Communications, Greenbelt, MD USA Lines: 35 Message-ID: <2ku50l$9lo@access1.digex.net> NNTP-Posting-Host: access1.digex.net Whew! After downloading and running MARS.EXE, I find myself stunned by how fast it worked and how realistic it looked.... I'm into programming my own demo now with a couple of friends. Our new group is called Mindware, and our demo should be finished within the next month or so. (No name yet) I'm now fairly experienced with graphics manipulation (3d, X-mode, VGA registers, etc.), but I still am amazed how smooth MARS is. Now I've pondered quite a bit how it's done. My first impression would be a ray-tracing like algorithm, where a ray is traced (quickly, of course) from the viewpoint, through the screen, and over the heightfield, testing for intersections along the way. But this seems like it would be far too slow for practical use (but it would certainly deal with the smoothness of the landscape and the order of mountains). My next impression was a polygon subdivision algorithm. Take four points from the heightfield that form a square, and draw that polygon. Go from front to back on the heightfield, drawing only if that area hasn't been drawn on before. But this seems like too much time would be spent on calculating the edges of the polygon and filling it. My final idea again involves going from front to back on the heightfield, but instead of drawing accurate polygons, just draw a rectangular region from the current point to the next point, with a flat top, descending down until the non-filled area ends. (This is probably not a very good explanation. :) So... any ideas anyone? Tell me if my ideas are really naive :) I might try coding some of these things to see if they work. Thanks in advance, and watch for our forthcoming demo! -- Kevin McCormick | "The more we try to control, the kmccorm@access.digex.net | less we are really in control." IRC: Xenophon | - Robert J. Oppenheimer This message is costing the net hundreds if not thousands of dollars to send. From rc1.vub.ac.be!ub4b!EU.net!sun4nl!wtrlnd!tess!postmaster Tue Mar 15 11:23:54 1994 Path: rc1.vub.ac.be!ub4b!EU.net!sun4nl!wtrlnd!tess!postmaster From: michiel@tess.wlink.nl (Michiel Ouwehand) Newsgroups: comp.sys.ibm.pc.demos Subject: Mars.uue (1/1) Message-ID: <762760829.AA03471@tess.wlink.nl> Date: Wed, 02 Mar 1994 09:12:01 Sender: postmaster@tess.wlink.nl Lines: 19 Hello M.D.Griffiths! [Äùú 28 Feb 94, M.D.Griffiths wrote to All: úùÄ] MDG> Yes it is a much more difficult proposition, since as it stands, MDG> no rotation is done, you simply move left or right. I would MDG> imagine that rotation would complicate things somewhat, perhaps MDG> the original algorithm might not be applicable? It makes a nice MDG> demo though :-). Would the author like to comment? I am not hte author, but I would like to comment. What the author is doing (as I see it) is calculate a fractal (this will be the height map) and calculate light-rays over it (this will be the colour map). Then, when drawing, each point on the screen is an interpollated version ofmore of the heights and colours in the map. Rotating will take some time, but isn't impossible as I see it. Groetjes, _ (Icarus / TùRùIùAùL) InterNet: michiel@tess.wlink.nl )\/(ichiel (_)uwehand FreeNet: 2:2802/108.11 From rc1.vub.ac.be!ub4b!EU.net!sunic!news.funet.fi!network.cc.jyu.fi!network.cc.jyu.fi!not-for-mail Thu Mar 10 10:07:29 1994 Path: rc1.vub.ac.be!ub4b!EU.net!sunic!news.funet.fi!network.cc.jyu.fi!network.cc.jyu.fi!not-for-mail From: ap@network.cc.jyu.fi (Patrick Aalto) Newsgroups: comp.sys.ibm.pc.demos Subject: Re: How in the world did they do MARS.EXE? Date: 1 Mar 1994 14:28:59 +0200 Organization: University of Jyvaskyla, Finland Lines: 171 Message-ID: <2kvceb$rjr@tukki.cc.jyu.fi> References: <2ku50l$9lo@access1.digex.net> NNTP-Posting-Host: tukki.cc.jyu.fi In article <2ku50l$9lo@access1.digex.net> kmccorm@access1.digex.net (Kevin McCormick) writes: >Now I've pondered quite a bit how it's done. Why bother pondering, since the person who created the demo was kind enough to post a description of the mothod, too. He did this at least in the 'rec.games.programming' and 'comp.graphics. algorithms' newsgroups. I think it might be a good idea for all the readers of this conference to visit those two, too (at least I do that). In any case, here's the description. I hope Tim Clarke don't mind... Patrick Aalto ap@jyu.fi -------- Voxel landscapes and How I did it --------------------------------- This document describes the method I used in my demo of a Martian terrain, which can be found at garbo.uwasa.fi:/pc/demo/mars10.zip. It's similar to a floating horizon hidden line removal algorithm, so you'll find discussion of the salient points in many computer graphics books. The difference is the vertical line interpolation. First, some general points: --------------------------- The map is a 256x256 grid of points, each having and 8-bit integer height and a colour. The map wraps round such that, calling w(u,v) the height at (u,v), then w(0,0)=w(256,0)=w(0,256)=w(256,256). w(1,1)=w(257,257), etc. Map co-ords: (u,v) co-ordinates that describe a position on the map. The map can be thought of as a height function w=f(u,v) sampled discretely. Screen co-ords: (x,y) co-ordinates for a pixel on the screen. To generate the map: -------------------- This is a recursive subdivision, or plasma, fractal. You start of with a random height at (0,0) and therefore also at (256,0), (0,256), (256,256). Call a routine that takes as input the size and position of a square, in the first case the entire map. This routine get the heights from the corners of the square it gets given. Across each edge (if the map has not been written to at the point halfway along that edge), it takes the average of the heights of the 2 corners on that edge, applies some noise proportional to the length of the edge, and writes the result into the map at a position halfway along the edge. The centre of the square is the average of the four corners+noise. The routine then calls itself recursively, splitting each square into four quadrants, calling itself for each quadrant until the length of the side is 2 pixels. This is probably old-hat to many people, but the map is made more realistic by blurring: w(u,v)=k1*w(u,v)+k2*w(u+3,v-2)+k3*w(u-2,v+4) or something. Choose k1,k2,k3 such that k1+k2+k3=1. The points at which the map is sampled for the blurring filter do not really matter - they give different effects, and you don't need any theoretical reason to choose one lot as long as it looks good. Of course do everything in fixed point integer arithmetic. The colours are done so that the sun is on the horizon to the East: Colour=A*[ w(u+1,v)-w(u,v) ]+B with A and B chosen so that the full range of the palette is used. The sky is a similar fractal but without the colour transformation. How to draw each frame ---------------------- First, draw the sky, and blank off about 50 or so scan lines below the horizon since the routine may not write to all of them (eg. if you are on top of a high mountain looking onto a flat plane, the plane will not go to the horizon). Now, down to business. The screen is as follows: --------------------------- | | | | | Sky | | | | | |a------------------------| Horizon | | | | Point (a)=screen co-ords (0,0) | Ground | x increases horizontally | | y increases downwards | | --------------------------- Imagine the viewpoint is at a position (p,q,r) where (p,q) are the (u,v) map co-ordinates and r is the altitude. Now, for each horizontal (constant v) line of map from v=r+100 (say) down to v=r, do this: 1. Calculate the y co-ordinate of map co-ord (p,v,0) (perspective transform) 2. Calculate scale factor f which is how many screen pixels high a mountain of constant height would be if at distance v from q. Therefore, f is small for map co-ords far away (v>>r) and gets bigger as v comes down towards r. 3. Work out the map u co-ord corresponding to (0,y). v is constant along each line. 4. Starting at the calculated (u,v), traverse the screen, incrementing the x co-ordinate and adding on a constant, c, to u such that (u+c,v) are the map co-ords corresponding to the screen co-ords (1,y). You then have 256 map co-ords along a line of constant v. Get the height, w, at each map co-ord and draw a spot at (x,y-w*f) for all x. Sorry, but that probably doesn't make much sense. Here's an example: Imagine sometime in the middle of drawing the frame, everything behind a point (say v=q+50) will have been drawn: --------------------------- | | | | | | | **** | | ********* | <- A mountain half-drawn. |-----**************------| |*************************| |********* *********| |****** ******| |.........................| <- The row of dots is at screen co-ord y | | corresponding to an altitude of 0 for that --------------------------- particular distance v. Now the screen-scanning routine will get called for v=q+50. It draws in a point for every x corresponding to heights at map positions (u,v) where u goes from p-something to p+something, v constant. The routine would put points at these positions: (ignoring what was there before) --------------------------- | | | | | | | | | | |-------------------------| | ***** | | *** *** | |******* *******| |.........................| | | --------------------------- So, you can see that the screen gets drawn from the back, one vertical section after another. In fact, there's more to it than drawing one pixel at every x during the scan - you need to draw a vertical line between (x,y old) to (x,y new), so you have to have a buffer containing the y values for every x that were calculated in the previous pass. You interpolate along this line (Gouraud style) from the old colour to the new colour also, so you have to keep a buffer of the colours done in the last pass. Only draw the vertical lines if they are visible (ie. going down, y new>y old). The screen is drawn from the back so that objects can be drawn inbetween drawing each vertical section at the appropriate time. If you need further information or details, mail me or post here... Posting will allow others to benefit from your points and my replies, though. Thank you for the response I have received since uploading this program. Tim Clarke, tjc1005@hermes.cam.ac.uk