|
| Interrups | Categories | Contents |
AX = B800h CX = size of reply buffer (01h-3Fh) ES:BX -> reply buffer for capture flags table (see #01805)
Return:
AL = status 00h successful
Note: This function is supported by Advanced NetWare 2.0+
See Also:
AX=B801h - AX=B802h - AH=DFh/DL=00h - AH=DFh/DL
Format of NetWare capture flags table:
Offset Size Description (Table 01805)
00h BYTE status (used internally, should be set to 00h)
01h BYTE print flags (see #01806)
02h BYTE tab size (01h-12h, default 08h)
03h BYTE printer number on server (00h-04h, default 00h)
04h BYTE number of copies to print (00h-FFh, default 01h)
05h BYTE form type required in printer (default 00h)
06h BYTE reserved
07h 13 BYTEs text to be placed on banner page
14h BYTE reserved
15h BYTE default local printer (00h = LPT1)
16h WORD (big-endian) timeout in clock ticks for flushing capture file
on inactivity, or 0000h to disable timeout
18h BYTE flush capture file on LPT close if nonzero
19h WORD (big-endian) maximum lines per page
1Bh WORD (big-endian) maximum characters per line
1Dh 13 BYTEs name of form required in printer
2Ah BYTE LPT capture flag
00h inactive, FFh LPT device is being captured
2Bh BYTE file capture flag
00h if no file specified, FFh if capturing to file
2Ch BYTE timing out (00h if no timeout in effect, FFh if timeout counter
running)
2Dh DWORD (big-endian) address of printer setup string
31h DWORD (big-endian) address of printer reset string
35h BYTE target connection ID
36h BYTE capture in progress if FFh
37h BYTE job queued for printing if FFh
38h BYTE print job valid if FFh
39h DWORD bindery object ID of print queue if previous byte FFh
3Dh WORD (big-endian) print job number (1-999)
Bitfields for NetWare print flags:
Bit(s) Description (Table 01806)
2 print capture file if interrupted by loss of connection
3 no automatic form feed after print job
6 printing control sequences interpreted by print service
7 print banner page before capture file
Category:
Netware
-
Int 21h
-
N
|
| Interrups | Categories | Contents |