|
| Interrups | Categories | Contents |
AH = 05h DX:DI -> buffer for user information record (see #03945)
Notes: MW386 provides this function for backward compatibility only, and sets many of the fields to zero because they are meaningless under MW386. This function has no effect when called by the host (user 0)
See Also: AH=03h
Format of Alloy user information record: Offset Size Description (Table 03945) 00h WORD segment of video RAM 02h WORD segment of secondary copy of video RAM 04h WORD offset of screen update flag (see INT 10/AH=8Bh) flag nonzero if update needed 06h WORD video NMI enable port (not used by MW386, set to 0000h) 08h WORD video NMI disable port (not used by MW386, set to 0000h) 0Ah BYTE processor type 00h 8088 01h V20 02h 8086 03h V30 06h 80386 0Bh WORD multitasking flag (00h = single tasking, 01h = multitasking) (not used by MW386, set to 0000h) 0Dh WORD offset of terminal driver (not used by MW386, set to 0000h) 0Fh BYTE port for console I/O (not used by MW386, set to 0000h) 10h WORD offset of processor communication busy flag bit 7 set when slave communicating with host 12h WORD pointer to FAR NX system call (not used by MW386, set to 0000h) 14h WORD offset of 16-byte user configuration record (see AH=38h) 16h WORD offset of command/status word 18h WORD offset of screen valid flag (see INT 10/AH=93h) nonzero if screen must be repainted 1Ah WORD offset of screen repaint flag 1Ch WORD pointer to NEAR NX system call (not used by MW386, set to 0000h) 1Eh WORD offset for intercept flags (not used by MW386, set to 0000h) intercept flag = FFh if MS-DOS intercepts should be disabled 20h WORD offset of terminal lock flag (see INT 10/AH=92h) lock flag = FFh if backgrnd screen updates should be suspended 22h 26 BYTEs reserved
Category: Network - Int 7Fh - A
|
| Interrups | Categories | Contents |